Starting the Tabletop Simulation

From EQUIS Lab Wiki

1. Turn on both projectors and align the table so that the picture is displayed within the borders of the Anoto paper.
2. Check out the ArmySim project from the SVN server. Further instructions can be found here.
3. Retrieve the Anoto SDK from the Equis Shared Server. It is found in the Tabletop Simulation folder as MIL-RTDP-SDK-1.1.2.zip. Extract this zip file on your computer.
4. Calibrate the table using the MultiPatternConfigurator in the bin/Configurator/MultiPatternConfigurator directory of the Anoto SDK.
5. Save the configuration file in the config folder of the ArmySim project.
6. Run the project.

Connecting the Anoto Pens

1. Pull cap off of Anoto pen, use a pen to press reset button on Anoto pen.
2. Pull cap off and on again.
3. Right click on bluetooth icon in the Windows task bar and click Add devices.
4. Wait until the Anoto pen is found and then click next. When asked for a key, type 0000.
5. The pen should then be installed.